Semaglutide 10 mg Vial Dosing Protocol

Semaglutide 10 mg Vial Dosing Protocol

Quickstart highlights

Semaglutide is a GLP-1 receptor agonist that enhances insulin secretion and suppresses appetite.

  • Concentration: 6.67 mg/mL (10 mg vial + 1.5 mL bac water).
  • Dose range: 300 µg (Week 1–2) up to 1,000 µg (maintenance) once weekly.
  • At 6.67 mg/mL, 1 unit ≈ 66.7 µg; draw 4.5 units for 300 µg, 15 units for 1,000 µg.
  • A single 10 mg vial yields roughly 10 doses at 1,000 µg maintenance — more cost-effective than a 5 mg vial for longer cycles.

Dosing table

For educational reference only. Your prescribing provider may adjust doses based on your clinical profile and response.

WeekDose (µg)UnitsFrequencyNotes
1-23004.5Once weeklyStarting dose — draw to 4.5 units on a U-100 syringe
3-46009Once weeklyPause if GI side effects persist
5-6100015Once weeklyMaintenance — at 6.67 mg/mL, 15 units = 1,000 µg

Gradual approach

WeekDose (µg)UnitsNotes
1-42503.75Slower ramp — use a 30-unit syringe, draw to 3.75 units
5-85007.5Increase only if tolerating well
9+100015Maintenance — 15 units on a U-100 syringe

Your free Semaglutide 10 mg Vial tracker

  • Dose reminders
  • Injection logging
  • Cycle progress
Add your listing Already have one? Sign in

Reconstitution steps

  1. Use 1.5 mL bacteriostatic water; inject slowly down the vial wall to yield 6.67 mg/mL.
  2. Gently swirl until fully dissolved; do not shake.
  3. Label the vial with reconstitution date; refrigerate 2–8 °C.

Supplies needed

8-week plan

  • 1 vial
  • 8 syringes
  • 2 mL bac water
  • 8 alcohol swabs

16-week plan

  • 1 vial
  • 16 syringes
  • 2 mL bac water
  • 16 alcohol swabs

24-week plan

  • 2 vials
  • 24 syringes
  • 4 mL bac water
  • 24 alcohol swabs
Need clinics? See vetted providers →
Advertisement

Protocol overview & cycle notes

Support weight management with a GLP-1 agonist titration using a 10 mg compounded vial. Higher concentration means fewer units per dose; a single vial covers 6–10+ weeks at maintenance.

Cycle length: 12 weeks on.

Off-cycle: 8 weeks off between cycles; monitor mood and energy during off-cycle.

Storage & handling

Lyophilized: store in cool, dry place until use. Reconstituted: refrigerate 2–8 °C; use within 28–56 days per manufacturer. Avoid freeze-thaw cycles.

Injection & tracking tips

  • Rotate injection sites (abdomen, thigh, upper arm) to reduce irritation.
  • At 6.67 mg/mL the unit counts are roughly half those of a 5 mg vial — double-check your math before drawing each dose.

Tracking

Logging helps you and your provider spot patterns and adjust dose or timing.

  • Log injection date, dose (units), and injection site.
  • Track appetite, energy, and any side effects weekly.
Log your cycle in the calculator →

How this works & references

Semaglutide is a GLP-1 receptor agonist that enhances insulin secretion and suppresses appetite. Titration reduces nausea and improves tolerability. Clinical data from the STEP trials support once-weekly dosing for weight management.

Frequently asked questions

How much bac water do I add to a 10 mg semaglutide vial?
Add 1.5 mL of bacteriostatic water to yield 6.67 mg/mL. Each unit on a U-100 syringe then equals approximately 66.7 µg. Compare: a 5 mg vial at 1.5 mL gives 3.33 mg/mL with 1 unit ≈ 33.3 µg.
How many doses are in a 10 mg vial?
At 6.67 mg/mL, a 10 mg vial reconstituted in 1.5 mL contains roughly 33 doses of 300 µg, or about 10 doses at the 1,000 µg maintenance level — making it more economical for longer cycles.
Is a 10 mg vial better than a 5 mg vial?
A 10 mg vial is more cost-effective for cycles of 10 weeks or more since you draw smaller volumes per dose and the vial lasts longer. A 5 mg vial is useful for a first cycle or if smaller upfront cost is preferred.
What syringes do I use for a 10 mg vial?
Use a U-100 insulin syringe. At 6.67 mg/mL, doses are smaller in volume — a 30-unit U-100 syringe works for most doses through maintenance (15 units = 1,000 µg).

Related protocols

This content is for informational purposes only and does not constitute medical advice. Consult a licensed healthcare provider before starting any peptide therapy. Dosing and protocols may vary by formulation and prescriber.

Sign In

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.